Project Description

Disposable Standard Capacity Filter Unit

It’s easy and simple to install and maintain these thin and lightweight units. The module can be flexibly designed to meet customer spec’s demand. By selecting among pack depth, media efficiency, air capacity and inlet size, the clean room designer can configure the unit to meet spec requirements and operating cost. This type of filter is mainly used in Class 1,000 to 100,000 C/R It’s easy to replace and more economical than Box Type.

Disposable Standard Capacity Filter Unit

It’s easy and simple to install and maintain these thin and lightweight units.
The module can be flexibly designed to meet customer spec’s demand
*Standard diameter of inlet duct are 14″Φ(350mm),12″Φ(300mm) and 10″Φ(250mm)

外框
Frame
陽極處理鋁框
Aluminum (Etruded Anodized)
濾材
Media
玻璃纖維紙
Waterproot fire retardant glassfiber
保護網
Faceguard
陽極處理鋁網
Aluminum (Etruded Anodized)
墊片
Gasket
Neoprene
EPDM
接著材
Bond
環氧樹脂 Epoxy Resin
PU Fire-retardant Urthane
最高溫度
Temperature
80°C
最高濕度
Humidity % RH
100% (無結霧狀態下)
100% (No condensation state)

測試方法
Test Method
  • 大氣塵 SCANNING TEST BY ATMOSPHERIC DUST
  • DOP
  • PAO 光度計掃描測試 (SCANNING TEST BY PAO)
補集效率 HEPA
Efficiency HEPA
≥99.97% . ≥99.99% (0.3μm)
補集效率 ULPA
Efficiency ULPA
≥99.999% . ≥99.9995% (0.1μm-0.2μm)

尺寸標示:H x W x D mm (不包含入風口高度)

型式
Model
效率 (%)
Efficiency
額定風量
Rated Capacity (m3/min)
Actual size
H x W x D mm
Type 初期壓損
INITIAL P.D
最終壓損
FINAL P.D
HAC
(HEPA)
99.97
99.99
 14.9CMM (526CFM)  570x570x150 T-bar 型 25.4 mmH2O
(250 pa)
50.4 mmH2O
(500 pa)
建議值
 31.4CMM (1109CFM)  570x1170x150
16.6CMM (586CFM) 600x600x150 輕鋼架型
 34.3CMM (1211CFM) 600x1210x150
 17.2CMM (607CFM)  610x610x150 庫板型
 35.2CMM (1243CFM)  610x1220x150

尺寸標示:H x W x D mm (不包含入風口高度)

型式
Model
效率 (%)
Efficiency
額定風量
Rated Capacity (m3/min)
Actual size
H x W x D mm
Type 初期壓損
INITIAL P.D
最終壓損
FINAL P.D
UAC
(ULPA)
99.999
99.9995
 8.7CMM (307CFM)  570x570x150 T-bar 型 27.5 mmH2O
(275 pa)
50.4 mmH2O
(500 pa)
建議值
18.5CMM (653CFM)  570x1170x150
9.7CMM (3.4CFM) 600x600x150 輕鋼架型
 20.2CMM (713CFM) 600x1210x150
 10.1CMM (357CFM)  610x610x150 庫板型
 20.7CMM (731CFM)  610x1220x150

※ 特殊尺寸或規格可依客戶需求製作。
※ Special dimension can be customized.